Non rolled / Semi finished products
| Products | Plant | Diameter | ||
|---|---|---|---|---|
| Continuous cast products | Hagondange | 240² CC blooms | ||
| Ingots | Fos-Sur-Mer | 5.3t – 6.2t – 7.5t – 10.4t: Square ingot 3.3t: Round ingot | ||
Hot rolled products
| Products | Plant | Diameter | Length | Tolerances |
|---|---|---|---|---|
| Rolled Blooms and billets | Fos-Sur-Mer | 80 to 400 mm | from 3 to 12 m | ± 1% to ± 3% of diameter |
| Rectangular rolled bloom | Fos-Sur-Mer | 70 to 600 mm | from 3 to 12m depending on diameter | |
| Bars | Dunes | 80 to 300 mm | from 4 to 12 m (>12 m upon request) | ± 0.3% to ± 1% of diameter depending on diameter |
| Hagondange | 16 to 100 mm | From 3 to 12 m | ||
| Fos-Sur-Mer | 80 to 325 mm | From 3 to 12 m | ||
| Wire rod | Fos-Sur-Mer | 5 to 32 mm | +0.20 /-0.20 mm or ± 1% |
Cold finished products
| Products | Plant | Diameter | Length | Tolerances |
|---|---|---|---|---|
| Peeled bars | Dunes | 76 to 300 mm | From 4 to 12.5 m | Classes 10 |
| Le Marais | 20 to 78 mm | from 3,5 to 7,5 m | Classe 9 | |
| Custines | 15 to 85 mm | Classes 10 to 9 | ||
| Ground bars | Custines | 10 to 80 mm | Classes 8 to 7 | |
| Cold drawn wire rod | Fos-Sur-Mer | 1 to 22 mm | ||
| Semi finished parts | Le Marais &/or Custines | • Sawn parts : Ø 10 - 150 mm • Sawing & chamfering : Ø 10 - 105 mm • Grinding (Bars): Ø 10 - 80mm • Centerless grinding (Slug): Ø 20 - 50mm • Drilling (Slug): Hole Ø 6-20mm; Slug Ø 20-35mm • Machining (Slug): Ø 10-46mm | ||
